Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$16.99
- From a long line of tough, light-weight chain engineering from SRAM
- Chain connector type: PowerLock
- For Use with SRAM 12-Speed Road Chains Only
- No tools necessary to install
- Chain connector qty/packaging: 4

$4.50
- Compatible with Shimano HG40/50/70/90 chains
- KMC Z50, Z7, Z8, X8.93, X8.99 chains
- Reusable
- No Tool Required
- Pin Length: 7.3 mm

$11.99 - $12.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface

$16.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands

$24.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs.
- Design and manufactured in Minneapolis, MN USA
- 7-8 NM tightening torque with light grease on threads only
- Material - 7075-T6 aluminum
- Weight - 5 bolts = 10 grams

$5.95 - $12.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo
- 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains
- 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

$7.00
An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you.
- 100% anodized aluminum
- Laser-etched
- Supalite

$8.00
An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you. Oil Slick Star Capz are the perfect touch for the perfect cockpit.

$8.00
An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you.
- 100% powder-coated aluminum
- Laser-etched
- Supalite

$12.00
The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Star Plugz are the clear choice for the discerning rider.
- Anodized aluminum bar plugs
- 3mm screw & expand
- Laser-etched
- Patented lock tight crown design (plugs never fall out)

$12.00
The premier bar plugs in the pro peloton scream style. Color match or contrast to get your ideal look. Laser Carbon Star Plugz are the perfect touch for the perfect cockpit.
- Aluminum laser-etched carbon bar plugs
- 3mm screw & expand
- Laser-etched
- Patented lock tight crown design (plugs never fall out)

$16.99
Frame brake mount kit for Stolen frames.
- M10
- Frame kit includes: 2x 990 posts, 1x cable guide & 1x cable stop

$13.99
The Vortex Redeux top cap features a unique, lightweight design.
- Machined from 6061 aluminum with a deeply recessed Allen wrench broach - slim shape to better work with stems that have a recessed compression bolt area
- Uses a 6mm Allen key
- 0.5 oz

$15.99
QUICK-LINK
FEATURE
- Tool-free assembly (possible)
- Non-reusable
- TL-CN10
BENEFIT
- Easy connect
- Compatible with current 11-speed chains
- Quick assembly tool

$25.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$35.00
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set.
- OEM pulley set for Dura-Ace R9100
- Sealed bearing guide & tension pulley
- Guide pulley with extra long teeth for increased chain control

$23.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace ST-R9120 levers

$14.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

$26.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace ST-9150 Di2 levers

$24.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again.
- Fits Dura-Ace R9170 Di2 levers

$51.00
Shimano Chainring Bolts
- For use with FC-6800 46t outer chainring
- Color: Black
- Length: 10 mm
- Material: Aluminum
- Type: Torx

$17.99 - $34.99
Replacement microSHIFT bar end shifter mounts allow you to replace broken units or convert microSHIFT thumb lever shifters to bar-end mount.
- Compatible with microSHIFT road-pull 8, 9, and 10-speed shifters only
- Expander plug compatible with handlebars with internal diameter of 19-21mm

$99.99
K-EDGE MTB Chain Guide is built to be the strongest and lightest solution to withstand the pedaling force of a derailed single ring chain in World Cup race conditions.
- Full-cage design for chain retention under the most abusive cross situations
- Braze-on mount and braze-on adapter clamp compatible
- Fully adjustable for height, center-line, and angle
- Optimized for 10 and 11spd drivetrains
- CNC Machined from 6061-T6 Aluminum (no plastic parts)
- Stainless Steel Hardware
- Weight: 60.8 grams (excluding braze-on adapter clamp)
- Compatibility: Single-ring bikes; frames with integrated braze-on front derailleur mount; also compatible with braze-on adapter clamps. All necessary hardware included
- Optimized for 34T to 44T Chain Rings
- “Hard to fit kits” may be needed for current applications, please contact Info@k-edge.com
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

$29.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The Pro model is designed to improve on the original K-EDGE Chain Catcher design:
- Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher
- Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher
- Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third-party braze-on adapter clamp. Shimano
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

$19.99
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia.
The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains.
- Material: 6061-T6 CNC machined Aluminum
- Fitment: All braze-on mounted front derailleurs*
- Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs
* Not compatible with Campy EPS
* May not work with all third party braze-on adapter clamps
- Made in Boise, Idaho, USA,
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Page 1 of 2
Next page